Search results for: 'power''

PDCI-32 - 3 channel programmable DC-CDI specially designed for drag racing

...programmable with Handheld Programmer and PC

Programmable
DC-CDI Ignition
2 Channel

PDCIS-A02T - single channel programmable DC-CDI for watercraft engines

...programmable with Handheld Programmer and PC

Supported watercraft:

Yamaha GP760 (HRS Connector)

Kawasaki SXR800/SXI750 (HRS Connector)

KV997 Engine (HRS Connector)

PROGRAMMERS SOLD SEPARATELY

Programmable
DC-CDI Ignition
2 Channel

with Exhaust Valve

UNIVERSAL IGNITION TESTER TS-01A

Ignition tester simulates signal from magnetic pickups (reluctors). Tester can be programmed for various single and twin cylinder ignition configurations. It is also suitable for 4 cylinder wasted spark ignition systems. Ignition tester can be used for testing DC-CDI ignitions, checking power valve operation, checking air solenoids and power jet operation.

Works only with one and two channel DC-CDI systems.

Does NOT work with Magneto CDI systems.

Does NOT work with Zeeltronic 3 channel PDCI-3X series.

PSR-B10T  -  single channel AC-CDI

PDCI-11VT - single channel programmable CDI and PV controller

...programmable with Handheld Programmer and PC

General Use (no plug)

Honda CR250 2000-2001 (no TPS)
Honda CR250 2002-2007 (with TPS)

Yamaha TZR250 3MA
 

PDCIS-32T programmable CDI 

TECHNICAL DATA

PDCIS-32T is three channel combined AC/DC-CDI with 2 switchable ignition maps, latching stop and automatic power down with extremely low current. It can be programmed with a PC.

Note: You must use programming cable Z-PCUSB-HRS to program this CDI. 

PCDIS-Y62T programmable CDI for Yamaha SuperJet 61X and 62T

TECHNICAL DATA

PDCIS-Y62T is single channel combined AC/DC-CDI with 2 switchable ignition maps, latching stop and automatic power down with extremely low current. It can be programmed with handheld programmer, or PC.

PDCIS-Y62T was specially designed for Yamaha SuperJet 61X and 62T stators. CDI is AC charged at starting and idle engine speeds. Spark energy is greatly improved from mid, to high engine speeds, with additional DC charging.

Note: You must use programming cable Z-PCUSB-HRS to program this CDI. 

Programmable CDI Ignition

Yamaha

RZ500
RD500

with Power Valves

Programmable CDI Ignition

Yamaha

RZ350YPVS
TZR250 2ma
TDR250
DT125R 3RM (DE03)
DT125X/RE

with Power Valves

PDCIS-A01T - single channel programmable DC-CDI 

...programmable with Handheld Programmer and PC