Z-PDCIS-Y62T
PCDIS-Y62T programmable CDI for Yamaha SuperJet 61X and 62T
TECHNICAL DATA
PDCIS-Y62T is single channel combined AC/DC-CDI with 2 switchable ignition maps, latching stop and automatic power down with extremely low current. It can be programmed with handheld programmer, or PC.
PDCIS-Y62T was specially designed for Yamaha SuperJet 61X and 62T stators. CDI is AC charged at starting and idle engine speeds. Spark energy is greatly improved from mid, to high engine speeds, with additional DC charging.
Note: You must use programming cable Z-PCUSB-HRS to program this CDI.
PCDIS-Y62T programmable CDI for Yamaha SuperJet 61X and 62T
TECHNICAL DATA
PDCIS-Y62T is single channel combined AC/DC-CDI with 2 switchable ignition maps, latching stop and automatic power down with extremely low current. It can be programmed with handheld programmer, or PC.
PDCIS-Y62T was specially designed for Yamaha SuperJet 61X and 62T stators.
CDI is AC charged at starting and idle engine speeds. Spark energy is greatly improved from mid, to high engine speeds, with additional DC charging.
- minimum revs = 200 RPM
- maximum revs = 20000 RPM
- minimum supply voltage = 9 Volts
- maximum supply voltage = 17 Volts
- recommended power supply voltage = 12÷15 Volts
- automatic power down current = 0,5 mAmp
- max idle current draw = 0,15 Amp
- output energy from idle to 9000 RPM = >75mJ
- max current = 1,5 Amp
Circuit is protected against reverse supply voltage (wrong connection).
Very important!
Resistor spark plugs must be used, because they produce less electromagnetic disturbances.
Danger of electric shock!
Avoid connecting PDCIS to 12V power supply, before connecting to ignition coil. High voltage is generated and touching free wires can cause electric shock, or damage the unit.
