Tarozzi Clip-ons

We offer four versions of Tarozzi clip-ons - the High Rise and Low Rise versions are similar in design. Unlike normal clip-ons these raise the bars up higher to provide a more relaxed riding position. The Low Rise model raises the bars 40mm(1.6") higher than usual while the High Rise version raises the bars a full 70mm(2.8")  higher than usual. The handlebars provided are chrome plated steel (22mm or .866" diameter) while the mounting parts are cast and machined aluminum. Black plastic plugs are provided for the open ends of the handlebars. Usable handlebar length for mounting brakes, throttle, and other items is 222mm(8.75"). For those who prefer a lighter aluminum handlebar for use with both the high rise and low rise clip-ons we offer that item as an accessory part in Clip-on Parts

As you can see in the picture above our High Rise and Low Rise clip-ons can be mounted in four different configurations. This makes them much easier to adapt to your motorcycle.  It allows you to work around interference with fairings, master cylinders, cables and all the other items which always seem to be in the way. In addition, it also allows you to get the perfect riding position by moving the handlebars forward or backward to suit your preference.

  

The picture above shows the mounting brackets for the fork tubes are one piece and will require the removal of your upper triple clamp for installation. Please note also that the bracket which the handlebars mount in is held in position by one large socket head cap screw. This allows you to adjust the bar angle up or down to whatever position suits your needs.

 

The third version of Tarozzi clip-ons we offer is the Offset type. We offer this design in both 105mm offset and 65mm offset. This design offsets the handlebars both forward and to the side to provide more room for the rider's arms and hands. These work especially well on motorcycles which are small or have a very compact design in the controls area. They also work well for riders who have long arms or prefer more handlebar leverage so they can ride in the "dirt track" style.

As you can see in the pictures above the design allows you to rotate the bars up or down using the main mounting bolt as well as rotating them to both forward and back on the fork tube. The handlebars provided are chrome plated steel (22mm or .866" diameter) while the mounting parts are cast and machined aluminum. The picture above shows the mounting brackets for the fork tubes are one piece and will require the removal of your upper triple clamp for installation. 

 

The fourth version of Tarozzi clip-ons we offer is the Standard version. These have no rise or offset forward. They do offset to the rear 35mm. This version works well as a replacement for stock handlebars and racing.

 

As you can see in the picture above the design allows you to rotate the bars up or down using the main mounting bolt as well as rotating them to both forward and back on the fork tube. The handlebars provided are chrome plated steel (22mm or .866" diameter) while the mounting parts are cast and machined aluminum. The picture above shows the mounting brackets for the fork tubes are one piece and will require the removal of your upper triple clamp for installation. 

© 2021 Fast from the Past. All Rights Reserved.