Z-PDCIS-32T
Special Order Product – 5-6 Weeks Delivery
PDCIS-32T programmable CDI
TECHNICAL DATA
PDCIS-32T is three channel combined AC/DC-CDI with 2 switchable ignition maps, latching stop and automatic power down with extremely low current. It can be programmed with handheld programmer, or PC.
Note: You must use programming cable Z-PCUSB-HRS to program this CDI.
PDCIS-32T programmable CDI
TECHNICAL DATA
PDCIS-32T is three channel combined AC/DC-CDI with 2 switchable ignition maps, latching stop and automatic power down with extremely low current. It can be programmed with handheld programmer, or PC.
- minimum revs = 200 RPM
- maximum revs = 20000 RPM
- minimum supply voltage = 9 Volts
- maximum supply voltage = 17 Volts
- recommended power supply voltage = 12 to 15 Volts
- automatic power down current = 2.4 mAmp
- max current draw at 8000 rpm= 14 volt 1.5 Amp
- constant output energy up to 8000 rpm = 37mj
Circuit is protected against reverse supply voltage (wrong connection).
Very important!
Resistor spark plugs must be used, because they produce less electromagnetic disturbances.
Danger of electric shock!
Avoid connecting PDCIS to 12V power supply, before connecting to ignition coil. High voltage is generated and touching free wires can cause electric shock, or damage the unit.
