Z-PDCI-R24T

PDCI-R24T - programmable DC-CD

...programmable with Handheld Programmer and PC

Technical data:

- minimum revs 200 RPM

- maximum revs 20000 RPM

- minimum supply voltage 7 Volts

- recommended power supply 12÷15 Volts

- maximum supply voltage 17 Volts

- stand-by current draw < 0.09 Amp

- current draw at 1300 RPM < 0.3 Amp

- current draw at 12000 RPM < 2.5 Amp

- maximum continuous current for shift light and power jet output 1 Amp

- peak current for shift light and power jet output 5 Amp

- maximum spark energy per channel 80mJ

Features:

- fast power-up (also starts only with condenser)

- full power starting spark energy already at 7Volts power supply

- one isolated input (pickup)

- two independent ignition coil outputs

- individual advance/retard of each output

- store and load function for two ignition maps

- external switch for changing ignition map while riding

- TPS input (Throttle Position Sensor)

- 2 power jet outputs

- duty cycle solenoid output (for regulating A/F ratio on some carburetors)

- soft rev limit (three stage rev limit)

- reduced spark at high revs with closed throttle (TCT mode)

- tachometer output

- easy and fast programming on the field, via hand held programmer

- programming while machine running - you can immediately see effects

- each curve can be set in 4 to 12 curve points

- 3D interpolated ignition map, if TPS selected

- signal delay compensation

- instant monitoring of rev's and angle, via LCD(hand held programmer)

- fast processing for high accuracy

- delays from 1us

- timing calculation for every 1 RPM change (1000, 1002, .. , 9805, 9806, ...)